PRODUCTS

Densimeter Tank
cm017_densimetre_tanki
densimetre_seti_cm017_densimetre_tanki
densimetre_seti_cm017_densimetre_tanki
Densimeter set is used to separate stoneless olives from the olives with stone by taking advantage of intensity difference. Olive is carried to the densimeter bunker from the pitting machine by an elevator. While stoneless olives stay on the surface of salted water in the bunker, the olives with stone sink bottom of the bunker. Olives in the bottom of the bunker are taken from the densimeter bunker by means of bypass (emptying) system periodically. Stoneless olives separated by this method are checked finally on the selection band. The densimeter tank is made of stainless steel completely.
  • MODEL: CM017
  • IP 65 plastic control panel (Hensel) 
  • 380 V / 50 HZ
  • Serial phase protection relay
  • AISI 304L stainless steel body
  • Bearings with plastic body and stainless steel housing
  • Plastic based with AISI 304 stud feet
  • Protection with thermic relay
  • All the bands are made of PVC conforming to FDA
  • Stone discharge by bypass system
  • Stainless steel open vane pump
  • Recirculation water filter
  • Stainless steel control valves
  • Waste olive section in picking band
  • Upper lightening in picking band
  • Lower discharge valves
  • Worm gear reducer
  • Length 1810mm
  • Width 655mm
  • Height 1885mm
  • Engine Power 0,37 kw
  • Capacity Of Tank 500 lt
Share This Page :